Freepbx Install Unistim Phone

Home › Downloads. Trying to install UNISTIM on freepbx with. Or is it installed and I just need to create the config file and populate with my phone.

Edit /etc/asterisk/unistim.conf Note that we are using the planned extension number as both Unistim ID and Unistim Line number, in this example, 6007. [6007]; name of the device, preferably the same as the extension number device=000ae40a6c38; mac address of the phone country=no; country (ccTLD) for dial tone frequency. See README, default = us extension=line; To register for extension. This is needed IN ADDITION to a dialplan entry context=from-internal; freePBX uses this for internally originated calls. Callerid='Desk'; Set a sane CID-display titledefault='Ext # 6007'; default = 'TimeZone (your time zone)'. 12 characters max timeformat=2; 0 = 0:00am; 1 (default) = 0h00, 2 = 0:00 line=>6007; Device and extension number. Only one line by device is currently supported.; Beware!

Only bookmark and softkey entries are allowed after line=> bookmark=2@Logout@8001**; I use the keys above the Line key for logging in and out bookmark=1@Login@8001*; of my primary Queue. Play around with any of the other options, they are fairly well documented. Add an extension / dialplan entry. If you see “Locating server”, you weren't fast enough. Power off (or reboot the phone - see below) and try again - EAP Enable?

(0-N,1-Y):0 - DHCP? (0-N,1-Y):1 - Cached IP?

(0-N,1-Y):1 - DHCP:0-Full,1-Partial:1 - S1 IP: xxx.xxx.xxx.xxx (Asterisk's Server IP Address) - S1 PORT: 5000 - S1 ACTION: 1 - S1 RETRY COUNT: 10 - S2 IP: xxx.xxx.xxx.xxx (Asterisk's Server IP Address) - S2 PORT: 5000 - S2 ACTION: 1 - S2 RETRY COUNT: 10 - Cfg XAS? (0-No,1-Yes):0 - VOICE VLAN? (0-N,1-Y):0 - PC PORT? (0-OFF,1-ON):1 - DATA VLAN? (0-N,1-Y):0 - DUPLEX (0-AUTO,1-FULL):1 - SPEED (0-10Mb,1-100Mb):1 - GARP Ignore? (0-N,1-Y):1 Full auto via DHCP.

Edit /etc/asterisk/unistim.conf Note that we are using the planned extension number as both Unistim ID and Unistim Line number, in this example, 6007. [6007]; name of the device, preferably the same as the extension number device=000ae40a6c38; mac address of the phone country=no; country (ccTLD) for dial tone frequency. See README, default = us extension=line; To register for extension. This is needed IN ADDITION to a dialplan entry context=from-internal; freePBX uses this for internally originated calls.

Callerid='Desk'; Set a sane CID-display titledefault='Ext # 6007'; default = 'TimeZone (your time zone)'. 12 characters max timeformat=2; 0 = 0:00am; 1 (default) = 0h00, 2 = 0:00 line=>6007; Device and extension number. Only one line by device is currently supported.; Beware! Only bookmark and softkey entries are allowed after line=> bookmark=2@Logout@8001**; I use the keys above the Line key for logging in and out bookmark=1@Login@8001*; of my primary Queue. Play around with any of the other options, they are fairly well documented. Add an extension / dialplan entry. If you see “Locating server”, you weren't fast enough.

Power off (or reboot the phone - see below) and try again - EAP Enable? (0-N,1-Y):0 - DHCP? (0-N,1-Y):1 - Cached IP?

(0-N,1-Y):1 - DHCP:0-Full,1-Partial:1 - S1 IP: xxx.xxx.xxx.xxx (Asterisk's Server IP Address) - S1 PORT: 5000 - S1 ACTION: 1 - S1 RETRY COUNT: 10 - S2 IP: xxx.xxx.xxx.xxx (Asterisk's Server IP Address) - S2 PORT: 5000 - S2 ACTION: 1 - S2 RETRY COUNT: 10 - Cfg XAS? (0-No,1-Yes):0 - VOICE VLAN? (0-N,1-Y):0 - PC PORT? (0-OFF,1-ON):1 - DATA VLAN? (0-N,1-Y):0 - DUPLEX (0-AUTO,1-FULL):1 - SPEED (0-10Mb,1-100Mb):1 - GARP Ignore? (0-N,1-Y):1 Full auto via DHCP.